WATCHPAX 40 Recovery Update Guide
This guide describes how to do a full re-image of Dataton WATCHPAX 40 media servers. A full re-image may be necessary if the unit has been corrupted.
NOTE: Please contact Dataton or your local Dataton partner to obtain the hardware image (ISO-file).
Recovery from USB drive
WATCHPAX 40 media servers contain two physical storage drives: a smaller SSD for hosting recovery images and a large, fast SSD for hosting the operating system and WATCHOUT media.
Steps 1 and 2 explain how to create a USB flash drive with the latest image and then update the smaller built-in recovery storage drive on the media server.
When this procedure is completed, you need to use the hidden boot menu to perform a reset to factory settings (Step 3).
Copyright 2022 Dataton AB. Teknikringen 22, SE 58330 Linköping, Sweden. Art. no: 3798 Rev:1.0
Specifications subject to change without prior notice. The information in this manual has been checked and is believed to be accurate. However, Dataton assumes no responsibility for any inaccuracies or errors in this manual or the products described. In no event will Dataton be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. The technical information contained herein regarding features and specifications is subject to change without notice. Products and manufacturers mentioned do not constitute a recommendation or endorsement by Dataton.